KR2 Wiring Diagram
The plane has a 12v, 40 amp alternator
and a Odesey battery. All switches and circuit breakers are located in a
small auxiliary panel on the right side of the cockpit. all equipment is
hooked up with its own positive and negative power wires. Shielded wiring
in used for all noise sensitive wiring as well as for the power supplies for the
strobes. All shields are terminated at a common buss as are all negative
wires. I used the following Wire Table to
size the wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
Switch panel installation |
|
|
|
|
|
|
|
|
