Marking cutouts in stub wing for fuel caps, lines and cables.

Making cutouts with Dremmel tool.

Right stub wing after cutouts.

Left stub wing after cutouts.

Foam blocks glued in to support foam sheets.

Front view of foam blocks on bottom of stub wings.

Foam glued in place to repair flap area damage and replace bottom wheelwell panel.

Foam was sanded to shape, micro applied, and Glassed into place.

The next morning it was ready to trim.

The wheelwells were cut out and boxed in with foam.

A layer of fiberglass was applied to the wheelwells.

Foam wedges were cut for the wheel flairings.

Profile view of landing gear.

Wheel fairings.

Cleaning up stub wings.

Cleaning up stub wings.

I hate sanding, I hate sanding, ...

Fiberfax epoxied to exhust area.

Adding landing light lens flanges.

After final night of sanding.

First coat of epoxy primer.

After 10 hrs of sanding a second coat of whitr epoxy.

Completed paint for underside.

Taxi light lens.

Plane back on its wheels.