January 31, 2009 KR2 update

   Not much to photograph.  I have wired in and tested the flap switch, the Master switch, the landing light, and power to the ignition switch.  I can properly switch between coil 1 and coil 2.  The amp meter shunt is installed, and the positive buss bar has a master relay attached.  The EIS has been sent in for an upgrade to include altitude and airspeed.

O2 sensor and alternator B+ lead

Knock sensor.

Taping threads in the Pos bus bar.

Pos. and neg. buss bar.

Support for radio tray.

Start of wireing for the switch panel.